SPECIFICATIONS:

Content        : Special Structure Silicone Emission

Ionic Content: Nonionic

Appearance  : White ? cream, fluent

pH               : 5.0 ± 0.5

Solubility      : Resolves into water in every percentage.

FEATURES:

A good hydrophilite provider softener for every cotton-cynthetic, especially towel and bathrobe type fabrics.

Antistatic feature. You can use it in same bath with acid, direct, reactive and sulphur paints.

Under normal process conditions, it?s compatible with optic materials and bleach auxiliary materials.

A softener which gives slipperiness, fullness and loose tuch.

It gives high hydrophilite feature to textile.

Pigmented printing can be made easily.

Provides stitch easiness.

USAGE:

We recommend to use %2-%3 of fabric weight in Overflow and Jigger.

STORAGE:

Storage life is 6 months if keep under conditions of closed orginal package and keep out from cold and warm.

PACKAGE:

For sale in 60 Kg. Package and 1 Ton Container.

SPECIFICATIONS:

Content        : Cationic

Appearance  : Cream, fluent

pH               : 4.5 ± 0.5

Solubility      : Resolves into tepid water in every percentage.

FEATURES:

Cationic softener used for cotton, wool, synthetic, fibers, fabrics and yarns made of all these blends.

During softening and finishing process after painting, it forms film layer on product and maximizes paint fastness.

Provides sewing and cutting easiness for fabric.

Suitable for exhausting and foulard method.

It gives soft and slide behavior to cotton, wool and synthetic fibre.

A good antistatic feature in synthetic fibre and its blends.

Can be added in paint bath during acrylic fibre painting.

You can use it in same bath with every kind of cationic and nonionic materials.

Doesn?t affect brightness negatively.

Doesn?t make permanent foam.

Prevents tossing in fibre.

USAGE:

Suitable for exhausting and foulard methods.

Used succesfully for avivage process and finishing and to soften cotton, wool, silk, acrylic, polyamid, polyester and all naturel-synthetic fibre blends.

Acidic environment increases softener?s affinity in fibre, so before process bath must be adjusted at 5 ? 5.5 pH value with acedic acid.

Before POWERSOFT ? KXC addition in bath, you must mix it and dilute with tepid-warm water and

Later boiler must be fed by this mixture.

Exhausting Method:

Usage                        :  %1 ? 2

pH                             :  5 ? 5.5 with acedic acid

Temperature              : 40 - 45 °C

Time                         : 20 ? 30 Min. It?s dried at

Dry                            : 130 °C.

Foulard Method:

pH                             :  5 ? 5.5 with acedic acid

Temperature              : 20 - 40 °C

Squeezing Percentage  :  %60 - 80

Usage Amount            :  10 ? 20 gr./lt.

Dry                           : 130 °C.

Softener Dismantle Process:

In 30 minutes and at 60 °C, softening finish is dismantled from fabric and yarn in bath including 5 cm³/lt formic acid. In this way, you can start to correct defective or abraj painting.

STORAGE:

Protect from freezing and extreme warm. Recommended to keep in closed storage. Storage life is 6 months if keep under conditions of closed orginal package and keep out from cold and warm

PACKAGE:  For sale in 100 Kg. Package and 1 Ton Containers.

SPECIFICATIONS:

Content        : Polymerization Product

Ionic Content: Nonionic

Appearance  : Colourless , fluent

pH               : 6.5 ± 0.5

Solubility      : Resolves into water easily.

FEATURES:

Used as hardness and filling material in finishing.

Fabrics edges must be dried at 130°C  in round knitting machine.

Used to stick product fabrics on blanket in rotation printing machine.

Cleaning in blanket is very easy.

USAGE:

Used in printing machines and finishing.

STORAGE:  

Storage life is 6 months if keep under conditions of closed orginal package and keep in cool place. You must close the package after usage. If not, film layer occurs on dispersion surface.

PACKAGE: 

For sale in 60 Kg. Package.

SPECIFICATIONS:

Content        : Polymerization Product

Ionic Content: Nonionic

Appearance  : Colourless , fluent

pH               : 6.5 ± 0.5

Solubility      : Resolves into water easily.

FEATURES:

Used as hardness and filling material in finishing.

Fabrics edges must be dried at 130°C  in round knitting machine.

Used to stick product fabrics on blanket in rotation printing machine.

Cleaning in blanket is very easy.

USAGE:

Used in printing machines and finishing.

STORAGE: 

Storage life is 6 months if keep under conditions of closed orginal package and keep in cool place. You must close the package after usage. If not, film layer occurs on dispersion surface.

PACKAGE: 

For sale in 60 Kg. Package.

SPECIFICATIONS:

Content        : Synthetic Material Dissolved in Metilenchlorite

Ionic Content: Nonionic

Appearance  : Transparent, clear, liquid

Solubility      : Does not resolve into water.

FEATURES:

Ricot fabrics? edge curling preventer edge starch.

After evaporation of solving material, it makes colorless and nonstick film.

Fast speed ability by means of solving material?s speedy evaporation.

Easily penetrates in tricot and fabrics by means of low viscocity.

USAGE:

POWERZOKOLA?KKSL can be used on edge of fabrics (woven in round knitting machine), being sprayed or in rams. For using in rams, rotating cylinder in a small reservoir and edge starch is printed on fabric edge as ribbon. Mostly enough for hardening of POWERZOKOLA?KKSL .

STORAGE: 

Storage life is 3 months if keep under conditions of closed orginal package and keep out from cool.

PACKAGE: 

For sale in 70 Kg. package.

SPECIFICATIONS:

Content        : Special Structure Silicone Emission

Ionic Content: Nonionic

Appearance  : Transparent, clear, liquid

pH               : 4.5.0 ± 0.5

Solubility      : Resolves into water in every percentage.

FEATURES:

A good hydrophilite provider softener for every cotton-cynthetic, especially towel and bathrobe type fabrics.

A softener which gives slipperiness, fullness and loose tuch.

It gives high hydrophilite feature to textile.

After applied on fabric, product can be repainted.

Pigmented printing can be made easily.

Provides stitch easiness.

USAGE:

We recommend to use %2 - %3 of fabric weight in Overflow and Jigger.

STORAGE:

Storage life is 6 months if keep under conditions of closed orginal package and keep out from cold and warm.

PACKAGE:

For sale in 55 Kg. Package and 1 Ton Containers

SPECIFICATIONS:

Content        : Special Structure Silicone Emission

Ionic Content: Nonionic

Appearance  : Transparent, clear, liquid

pH               : 4.5.0 ± 0.5

Solubility      : Resolves into water in every percentage.

FEATURES:

A good hydrophilite provider softener for every cotton-cynthetic, especially towel and bathrobe type fabrics.

A softener which gives slipperiness, fullness and loose tuch.

It gives high hydrophilite feature to textile.

After applied on fabric, product can be repainted.

Pigmented printing can be made easily.

Provides stitch easiness.

USAGE:

We recommend to use %2 - %3 of fabric weight in Overflow and Jigger.

STORAGE:

Storage life is 6 months if keep under conditions of closed orginal package and keep out from cold and warm.

PACKAGE:

For sale in 55 Kg. Package and 1 Ton Containers

SPECIFICATIONS:

Content        : Special Structure Silicone Emission

Ionic Content: Nonionic

Appearance  : Transparent, clear, liquid

pH               : 4.5.0 ± 0.5

Solubility      : Resolves into water in every percentage.

FEATURES:

A good hydrophilite provider softener for every cotton-cynthetic, especially towel and bathrobe type fabrics.

A softener which gives slipperiness, fullness and loose tuch.

It gives high hydrophilite feature to textile.

After applied on fabric, product can be repainted.

Pigmented printing can be made easily.

Provides stitch easiness.

USAGE:

We recommend to use %2-%3 of fabric weight in Overflow and Jigger.

STORAGE:

Storage life is 6 months if keep under conditions of closed orginal package and keep out from cold and warm.

PACKAGE:

For sale in 55 Kg. Package and 1 Ton Containers

SPECIFICATIONS:

Content        : Amino Functional Silicone

Ionic Content: Cationic

Appearance  : Transparent Emulsion, fluid

pH               : 4.5.0 ± 0.5

Solubility      : Resolves into cold water in every percentage.

FEATURES:

It gives soft, slippery and permanent elastomeric feature to fabric.

Provides perfect sewing and cutting easiness for fabric.

Practicable for every kind of painted and printed products.

Resistant to wet and dry cleaning.

Prevents fluff and electricity.

Non-wrinkle feature.

A micro silicone emulsition produced for fibres which made of all blends.

USAGE:

Machine rotation speed must be kept stable at minimum level during exhausting method.

You must wash fabric completely before silicone finishing.

You can apply easily in foulard and exhausting methods.

Provides better results for dry process.

Foulard     Usage               15 ? 35 gr./lt.

                 pH Value           5 ? 5.5

                 Temperature     Don?t work above 40°C

STORAGE:

Storage life is 6 months if keep under conditions of closed orginal package and keep out from cold and warm.

PACKAGE:

For sale in 60 Kg. Package and 1 Ton Container.

SPECIFICATIONS:

Content        : Amino Functional Silicone

Ionic Content: Cationic

Appearance  : Transparent Emulsion, fluid

pH               : 4.5.0 ± 0.5

Solubility      : Resolves into cold water in every percentage.

FEATURES:

It gives soft, slippery and permanent elastomeric feature to fabric.

Provides perfect sewing and cutting easiness for fabric.

Practicable for every kind of painted and printed products.

Resistant to wet and dry cleaning.

Prevents fluff and electricity.

Non-wrinkle feature.

A micro silicone emulsition produced for fibres which made of all blends.

USAGE:

Machine rotation speed must be kept stable at minimum level during exhausting method.

You must wash fabric completely before silicone finishing.

You can apply easily in foulard and exhausting methods.

Provides better results for dry process.

Foulard     Usage               15 ? 35 gr./lt.

                 pH Value           5 ? 5.5

                 Temperature     Don?t work above 40°C

STORAGE:

Storage life is 6 months if keep under conditions of closed orginal package and keep out from cold and warm.

PACKAGE:

For sale in 60 Kg. Package and 1 Ton Container.

SPECIFICATIONS:

Content        : Amino Functional Silicone

Ionic Content: Cationic

Appearance  : Transparent Emulsion, fluid

pH               : 4.5.0 ± 0.5

Solubility      : Resolves into cold water in every percentage.

FEATURES:

It gives soft, slippery and permanent elastomeric feature to fabric.

Provides perfect sewing and cutting easiness for fabric.

Practicable for every kind of painted and printed products.

Resistant to wet and dry cleaning.

Prevents fluff and electricity.

Non-wrinkle feature.

Gives full behavior to fabric.

A consantrated micro silicone emulsition produced for fibres which made of all blends.

It gives silky handle to fabric.

USAGE:

Machine rotation speed must be kept stable at minimum level during exhausting method.

You must wash fabric completely before silicone finishing.

You can apply easily in foulard and exhausting methods.

Provides better results for dry process.

Foulard

Usage               : 10 ? 20 gr./lt.

pH Value           : 5 ? 5.5

Temperature     : 40 °C

Don?t work above 40 °C

STORAGE:

Storage life is 6 months if keep under conditions of closed orginal package and keep out from cold and warm.

PACKAGE:

For sale in 60 Kg Package and 1 Ton Container.

SPECIFICATIONS:

Content        : Cationic

Appearance  :  Cream-White, stiff shape, fluent

pH               :  3.5 + 0.5

Solubility      :  Resolves into tepid water in every percentage.

FEATURES:

Cationic softener used for cotton, wool, synthetic, fibers, fabrics and yarns made of all these blends.

Suitable for exhausting and foulard methods.

Doesn?t make permanent foam. It gives soft and slide behavior to cotton, wool and synthetic fibre

A good antistatic feature in synthetic fibre and its blends.

During softening and finishing process after painting, it forms film layer on product and maximizes paint fastness.

Prevents tossing in fibre. Doesn?t affect brightness negatively.

Can be added in paint bath during acrylic fibre painting.

USAGE:

Suitable for exhausting and foulard methods.

Used succesfully for avivage process and finishing and to soften cotton, wool, silk, acrylic, polyamid, polyester and all naturel-synthetic fibre blends.

Acidic environment increases softener?s affinity in fibre, so before process bath must be adjusted at

5 ? 5.5 pH value with acedic acid.

Before POWERSOFT ? KD addition in bath, you must mix it and dilute with tepid-warm water and

Later boiler must be fed by this mixture.

Exhausting Method:

Usage                   : %3 - 4

pH                        : 5 ? 5.5 with acedic acid

Temperature          : 40 - 45 °C

Time                     : 20 ? 30 Min. It?s dried

Dry                       : 130 °C

Foulard Method:

   pH                             : 5 ? 5.5 with acedic acid

   Temperature              : 20 - 40 °C

   Squeezing Percentage: %80 - 100

   Usage Amount            : 20 ? 40 gr./lt.

   Dry                           : 130 °C

Softener Dismantle Process:

In 30 minutes and at 60 °C, softening finish is dismantled from fabric and yarn in bath including 5 cm³/lt formic acid. In this way, you can start to correct defective or abraj painting.

STORAGE:

Protect from freezing and extreme warm. Recommended to keep in closed storage.

Storage life is 1 year if keep under conditions of closed orginal package and keep out from cold and warm.

PACKAGE:

For sale in 100 Kg. Package and 1 Ton Containers

SPECIFICATIONS:

Content        : Cationic

Appearance  :  Cream-White, stiff shape, fluent

pH               :  3.5 + 0.5

Solubility      :  Resolves into tepid water in every percentage.

FEATURES:

Cationic softener used for cotton, wool, synthetic, fibers, fabrics and yarns made of all these blends.

Suitable for exhausting and foulard methods.

Doesn?t make permanent foam. It gives soft and slide behavior to cotton, wool and synthetic fibre

A good antistatic feature in synthetic fibre and its blends.

During softening and finishing process after painting, it forms film layer on product and maximizes paint fastness.

Prevents tossing in fibre. Doesn?t affect brightness negatively.

Can be added in paint bath during acrylic fibre painting.

USAGE:

Suitable for exhausting and foulard methods.

Used succesfully for avivage process and finishing and to soften cotton, wool, silk, acrylic, polyamid, polyester and all naturel-synthetic fibre blends.

Acidic environment increases softener?s affinity in fibre, so before process bath must be adjusted at

5 ? 5.5 pH value with acedic acid.

Before POWERSOFT ? KDY addition in bath, you must mix it and dilute with tepid-warm water and

Later boiler must be fed by this mixture.

Exhausting Method:

Usage                   : %3 - 4

pH                        : 5 ? 5.5 with acedic acid

Temperature          : 40 - 45 °C

Time                     : 20 ? 30 Min. It?s dried

Dry       : 130 °C

Foulard Method:

   pH                             : 5 ? 5.5 with acedic acid

   Temperature              : 20 - 40 °C

   Squeezing Percentage: %80 - 100

   Usage Amount            : 20 ? 40 gr./lt.

   Dry                           : 130 °C

Softener Dismantle Process:

In 30 minutes and at 60 °C, softening finish is dismantled from fabric and yarn in bath including 5 cm³/lt formic acid. In this way, you can start to correct defective or abraj painting.

STORAGE:

Protect from freezing and extreme warm. Recommended to keep in closed storage.

Storage life is 1 year if keep under conditions of closed orginal package and keep out from cold and warm.

PACKAGE:

For sale in 100 Kg. Package and 1 Ton Containers

SPECIFICATIONS:

Content        : Cationic

Appearance  :  Cream-White, stiff shape, fluent

pH               :  3.5 + 0.5

Solubility      :  Resolves into tepid water in every percentage.

FEATURES:

Cationic softener used for cotton, wool, synthetic, fibers, fabrics and yarns made of all these blends.

Suitable for exhausting and foulard methods.

Doesn?t make permanent foam. It gives soft and slide behavior to cotton, wool and synthetic fibre

A good antistatic feature in synthetic fibre and its blends.

During softening and finishing process after painting, it forms film layer on product and maximizes paint fastness.

Prevents tossing in fibre. Doesn?t affect brightness negatively.

Can be added in paint bath during acrylic fibre painting.

USAGE:

Suitable for exhausting and foulard methods.

Used succesfully for avivage process and finishing and to soften cotton, wool, silk, acrylic, polyamid, polyester and all naturel-synthetic fibre blends.

Acidic environment increases softener?s affinity in fibre, so before process bath must be adjusted at

5 ? 5.5 pH value with acedic acid.

Before POWERSOFT ? KDYC addition in bath, you must mix it and dilute with tepid-warm water and

Later boiler must be fed by this mixture.

Exhausting Method:

Usage                   : %2 ? 3

pH                        : 5 ? 5.5 with acedic acid

Temperature          : 40 - 45 °C

Time                     : 20 ? 30 Min. It?s dried

Dry       : 130 °C

Foulard Method:

   pH                             : 5 ? 5.5 with acedic acid

   Temperature              : 20 - 40 °C

   Squeezing Percentage: %80 - 100

   Usage Amount            : 20 ? 40 gr./lt.

   Dry                           : 130 °C

Softener Dismantle Process:

In 30 minutes and at 60 °C, softening finish is dismantled from fabric and yarn in bath including 5 cm³/lt formic acid. In this way, you can start to correct defective or abraj painting.

STORAGE:

Protect from freezing and extreme warm. Recommended to keep in closed storage.

Storage life is 1 year if keep under conditions of closed orginal package and keep out from cold and warm.

PACKAGE:

For sale in 100 Kg. Package and 1 Ton Containers

SPECIFICATIONS:

Content        :  Cationic

Appearance  :  Cream, stiff shape, fluent

pH               :  4.0 ± 0.5

Solubility      :  Resolves into tepid water in every percentage.

FEATURES:

It gives slide and soft tuch to products. Cationic softener used for cotton, wool, synthetic, fibers, fabrics and yarns made of all these blends.

Doesn?t make permanent foam. It gives soft and slide behavior to cotton, wool and synthetic fibre

A good antistatic feature in synthetic fibre and its blends.

During softening and finishing process after painting, it forms film layer on product and maximizes paint fastness.

Prevents tossing in fibre. Doesn?t affect brightness negatively.

Can be added in paint bath during acrylic fibre painting.

You can use it in same bath with every kind of cationic and nonionic materials.

USAGE:

Suitable for exhausting and foulard methods.

Used succesfully for avivage process and finishing and to soften cotton, wool, silk, acrylic, polyamid, polyester and all naturel-synthetic fibre blends.

Acidic environment increases softener?s affinity in fibre, so before process bath must be adjusted at 5-5.5 pH value with acedic acid.

Before POWERSOFT-RDC addition in bath, you must mix it and dilute with tepid-warm water and

Later boiler must be fed by this mixture.

Exhausting Method:

Usage                          :  %1 - 2

pH                               :  5 ? 5.5 with acedic acid

Temperature                 : 40 - 45 °C

Time                            : 20 ? 30 Min. It?s dried at 130 °C.

Foulard Method:

pH                               :  5 ? 5.5 with acedic acid

Temperature                 : 20 - 40 °C

Squeezing Percentage   :  %80 - 100

Usage Amount              :  10 ? 20 gr./lt. POWERZOSOFT ? RDC usage results best.                 It?s dried at 130 °C

 Softener Dismantle Process:

In 30 minutes and at 60 °C, softening finish is dismantled from fabric and yarn in bath including 5 cm³/lt formic acid. In this way, you can start to correct defective or abraj painting.

STORAGE:

Protect from freezing and extreme warm. Recommended to keep in closed storage.

Storage life is 1 year if keep under conditions of closed orginal package and keep out from cold and warm.

PACKAGE:

For sale in 100 Kg. package.

SPECIFICATIONS:

Content        : Cationic

Appearance  :  Cream-White, stiff shape

pH               :  4.0 -5.5

Solubility      :  Resolves into tepid water in every percentage.

FEATURES:

Cationic softener used for cotton, wool, synthetic, fibers, fabrics and yarns made of all these blends.

Avivage material which has antistatic feature.

Suitable for exhausting and foulard method.

Doesn?t make permanent foam.

It gives soft and slide behavior to cotton, wool and synthetic fibre.

A good antistatic feature in synthetic fibre and its blends.

During softening and finishing process after painting, it forms film layer on product and maximizes paint fastness.

Prevents tossing in fibre.

Doesn?t affect brightness negatively.

Can be added in paint bath during acrylic fibre painting.

USAGE:

Suitable for exhausting and foulard methods.

Used succesfully for avivage process and finishing and to soften cotton, wool, silk, acrylic, polyamid, polyester and all naturel-synthetic fibre blends.

Acidic environment increases softener?s affinity in fibre, so before process bath must be adjusted at 5-5.5 pH value with acedic acid.

Before POWERSOFT-KM addition in bath, you must mix it and dilute with tepid-warm water and

Later boiler must be fed by this mixture.

Exhausting Method:

Usage                          :  %2 - 3

pH                               :  5 ? 5.5 with acedic acid

Temperature                 : 40 - 45 °C

Time                            : 20 ? 30 Min. It?s dried at 130 °C.

Foulard Method:

pH                               :  5 ? 5.5 with acedic acid

Temperature                 : 20 - 40 °C

Squeezing Percentage   :  %80 - 100

Usage Amount              :  10 ? 30 gr./lt. POWERZSOFT ? KM usage results best.

It?s dried at 130 °C

Softener Dismantle Process:

In 30 minutes and at 60 °C, softening finish is dismantled from fabric and yarn in bath including 5 cm³/lt formic acid. In this way, you can start to correct defective or abraj painting.

STORAGE:

Protect from freezing and extreme warm. Recommended to keep in closed storage.

Storage life is 1 year if keep under conditions of closed orginal package and keep out from cold and warm.

PACKAGE: 

For sale in 100 Kg. package.

SPECIFICATIONS:

Content        :  Etoxile Product of Oil Acid Ester

Ionic Content:  Nonionic

Appearance  :  Light Cream, fluent

pH               :  6.0 ± 1.0

Solubility      :  Resolves into tepid water in every percentage.

FEATURES:

Nonionic softener which gives soft and silky tuch to every kind of product made of naturel and synthetic fibres and does not turn yellow. Compatible with optical materials and bleaching auxiliary materials under normal conditions. Does not turn yellow on white products. Antistatic Feature. You can use it in same bath with acid, direct, reactive and sulphur paints. During winch working, it prevents refraction because of it gives fabric slide feature. Compatible with size, non-wrinkle and water-proof finishing baths. Provide better milling process and prevents refraction in milling machines because of slide feature. Resistant to hard water, not much acidic and basic water. No negative effect to brightness.

USAGE:

Suitable for exhausting and foulard methods. pH: 5 ? 5.5 (With acedic acid)

Before POWERZOSOFT ? NY added in bath bath, must be mixed with tepid-warm water and diluted.

Later boiler must be fed by this mixture.

Exhausting Method:

POWERZOSOFT ? NY must be used in recommended amount at 40-50 °C about 15 ? 20 Min.

Foulard Method :

You must work at 20 ? 40 °C  and at %80 ? 100 squeeze percentage.

Drying temperature is 130 °C.

Polyacrilic Fibre                    3.0-4.0 gr./lt. 

Viscose                                   1.5-2.0 gr./lt. 

Cotton                                    3.0-4.0 gr./lt. 

Polyester Polyamid Wool      3.0-4.0 gr./lt. 

STORAGE:

Storage life is 1 year if keep under conditions of closed orginal package and keep out from cold and warm.

PACKAGE:

For sale in 60 Kg. Package and 1 Ton Container.

SPECIFICATIONS:

Content        : Etoxile Product of Oil Acid Ester

Ionic Content: Nonionic

Appearance  : Light Cream, fluent

pH               : 5.0 ± 1.0

Solubility      : Resolves into tepid water in every percentage.

FEATURES:

Nonionic softener which gives soft and silky tuch to every kind of product made of naturel and synthetic fibres and does not turn yellow. Compatible with optical materials and bleaching auxiliary materials under normal conditions. Does not turn yellow on white products. Antistatic Feature. You can use it in same bath with acid, direct, reactive and sulphur paints. During winch working, it prevents refraction because of it gives fabric slide feature. Compatible with size, non-wrinkle and water-proof finishing baths. Provide better milling process and prevents refraction in milling machines because of slide feature. Resistant to hard water, not much acidic and basic water. No negative effect to brightness.

USAGE:

Suitable for exhausting and foulard methods. pH: 5 ? 5.5 (With acedic acid)

Before POWERZOSOFT ? NYB added in bath bath, must be mixed with tepid-warm water and diluted.

Later boiler must be fed by this mixture.

Exhausting Method:

POWERZOSOFT ? NYB must be used in recommended amount at 40-50 °C about 15 ? 20 Min.

Foulard Method :

You must work at 20 ? 40 °C  and at %80 ? 100 squeeze percentage.

Drying temperature is 130 °C.

Polyacrilic Fibre                    3.0 ? 4.0 gr./lt. 

Viscose                                   1.5 ? 2.0 gr./lt. 

Cotton                                    3.0 ? 4.0 gr./lt. 

Polyester Polyamid Wool      3.0 ? 4.0 gr./lt. 

STORAGE:

Storage life is 6 months if keep under conditions of closed orginal package and keep out from cold and warm.

PACKAGE:

For sale in 60 Kg. Package and 1 Ton Container

SPECIFICATIONS:

Content        :  Etoxile Product of Oil Acid Ester

Ionic Content:  Nonionic

Appearance  :  Light Cream, fluent

pH               :  5.0 ± 1.0

Solubility      :  Resolves into tepid water in every percentage.

FEATURES:

Nonionic softener which gives soft and silky tuch to every kind of product made of naturel and synthetic fibres and does not turn yellow. Compatible with optical materials and bleaching auxiliary materials under normal conditions. Does not turn yellow on white products. Antistatic Feature. You can use it in same bath with acid, direct, reactive and sulphur paints. During winch working, it prevents refraction because of it gives fabric slide feature. Compatible with size, non-wrinkle and water-proof finishing baths. Provide better milling process and prevents refraction in milling machines because of slide feature. Resistant to hard water, not much acidic and basic water. No negative effect to brightness.

USAGE:

Suitable for exhausting and foulard methods.

pH: 5 ? 5.5 (With acedic acid)

Before POWERZOSOFT-NYK added in bath bath, must be mixed with tepid-warm water and diluted.

Later boiler must be fed by this mixture.

Exhausting Method

POWERZOSOFT-NYK must be used in recommended amount at 40 ? 50 °C about 15 ? 20 Min.

Foulard Method

You must work at 20 ? 40 °C  and at %80 ? 100 squeeze percentage.

Drying temperature is 130 °C.

Polyacrilic Fibre                    3.0 ? 5.0 gr./lt. 

Viscose                                   2.0 ? 3.0 gr./lt. 

Cotton                                    3.0 ? 5.0 gr./lt. 

Polyester Polyamid Wool      3.0 ? 5.0 gr./lt. 

STORAGE:

Storage life is 1 year if keep under conditions of closed orginal package and keep out from cold and warm.

PACKAGE:

For sale in 60 Kg. Package and 1 Ton Container.

SPECIFICATIONS:

Content        : Polyvinyl Acetate Emulsion

Ionic Content: Nonionic

Appearance  : White Dispersion in fly stiff shape

pH               : 3.0 ? 4.0

Solubility      : Resolves into water easily.

FEATURES:

Used as filling and hardness material.

You must dilute with water.

A good edge starch, good result with aparatus and in sanforizing process.

When it dried, it gives transparent, hard and invariable color film.

Penetrationg on fibre is very good due to product?s granule dimension is very small.

Does not turn it yellow.

USAGE:

Rotation is used in printing machines and finishing.

Use it diluted with 1:3 ratio water according to desired effect.

STORAGE: 

Storage life is 6 months if keep under conditions of closed orginal package and keep out from cold and warm. You must closed the package after usage. If not, film layer occurs on dispersion surface.

PACKAGE: 

For sale in 120 Kg. package.